Appearance
GRN3D-PLA-B01
- Brand GRN3D
- GREENPOLYMER 3D printing material
- Material PLA
- PLA
- Descriptor B
- Marble
- Sequence 01
- Model 01
GREENPOLYMER PLA Marble
Stone texture.
Available Typical values. Refer to the actual TDS.
A loaded bar is heated in an oil bath at a steady rate; the result is the temperature at which it reaches the set deflection
Print settings
Typical values. Refer to the actual TDS.
- Nozzle temperature
- 190–230 °C
- Bed temperature
- 45–65 °C
- Print speed
- 50–200 mm/s
- Fan
- 100 %
- Enclosed chamber
- Not needed
- Drying before printing
- 50–55 °C / 6–8 h
- Hardened steel nozzle
- Not needed; 0.2 mm nozzle not recommended
Typical properties
Typical values. Refer to the actual TDS.
| Property | Typical value | Test standard |
|---|---|---|
| An illustration, not a measurement: Immersion method: weighed in air, then in a liquid; buoyancy gives the density | 1.22–1.30 g/cm³ | ISO 1183 |
| An illustration, not a measurement: A dumbbell specimen is pulled at a constant speed and the stress–strain curve is recorded until it breaksPrinted specimen, XY | 30–45 MPa | ISO 527-2 |
| An illustration, not a measurement: A loaded bar is heated in an oil bath at a steady rate; the result is the temperature at which it reaches the set deflection0.45 MPa | 50–58 °C | ISO 75 |
Typical values. Refer to the actual TDS. Parameters: to be corrected by GREENPOLYMER. GREENPOLYMER test data: to be verified by GREENPOLYMER.
Immersion method: weighed in air, then in a liquid; buoyancy gives the density
Specifications and documents
- Typical uses
- Architectural models, planters, ornaments
- Diameter
- 1.75 mm
- Net weight
- 1 kg
- Colors
Color codes follow the GREENPOLYMER color list; contact us for custom colors.
- TDS / SDS
Need the TDS / SDS (Chinese or English)? Email hello@greenpolymer.com with the product code.
- Material
- Related industries
Standard diameter 1.75 mm; 2.85 mm on request. Diameter tolerance ±0.03 mm (to be verified by GREENPOLYMER). Other colors available as OEM custom colors.
Contact us
Tell us about the part, material requirements, equipment and expected volume. We will recommend suitable grades and the validation data you need.