Typical values. Refer to the actual TDS.
| Compare | Model | Nozzle temperature | Bed temperature | Print speed | Fan | Enclosed chamber | Drying before printing | Hardened steel nozzle | DensityISO 1183 | Note | Diameter | Net weight | Standard colors | Uses |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PVA Soluble SupportGRN3D-PVA-S01 | 190–220 °C | 45–60 °C | 20–60 mm/s | 50–100 % | Not needed | Required: 55 °C / 8 h; store sealed after opening | Not needed | 1.19–1.25 g/cm³ | Warm water speeds up dissolving | 1.75 mm | 0.5 kg | 9002 Natural | Internal supports for PLA, PETG and TPU parts | |
| BVOH Soluble SupportGRN3D-BVOH-S01 | 200–220 °C | 50–60 °C | 20–80 mm/s | 50–100 % | Not needed | Required: 55–60 °C / 8 h | Not needed | 1.14–1.20 g/cm³ | Compatibility with ABS and other materials subject to testing | 1.75 mm | 0.5 kg | 9002 Natural | Complex supports for PLA, PETG and TPU parts | |
| Breakaway Support for PLA/PETGGRN3D-BRK-01 | 200–230 °C | 45–65 °C | 30–150 mm/s | Per main material | Not needed | 50–55 °C / 6–8 h | Not needed | — | Recommended for support interface layers only | 1.75 mm | 0.5 kg | 1001 White | Support interfaces for PLA and PETG parts | |
| Breakaway Support for ABS/ASAGRN3D-BRK-02 | 230–260 °C | 90–110 °C | 30–150 mm/s | Per main material | Recommended | 70–80 °C / 4–6 h | Not needed | — | Recommended for support interface layers only | 1.75 mm | 0.5 kg | 1001 White | Support interfaces for ABS and ASA parts | |
| Breakaway Support for PA/PETGRN3D-BRK-03 | 250–280 °C | 80–100 °C | 30–120 mm/s | Per main material | Recommended | Required: 80 °C / 8 h | Not needed | — | Recommended for support interface layers only | 1.75 mm | 0.5 kg | 1001 White | Support interfaces for PA, PET and their fiber-reinforced parts |
GRN3D-PVA-S01
Water-soluble
GRN3D-BVOH-S01
Water-soluble, dissolves faster
GRN3D-BRK-01
Breaks away by hand, clean interface
GRN3D-BRK-02
Breaks away by hand
GRN3D-BRK-03
Breaks away by hand
Typical values. Refer to the actual TDS. Parameters: to be corrected by GREENPOLYMER. GREENPOLYMER test data: to be verified by GREENPOLYMER.
Standard diameter 1.75 mm; 2.85 mm on request. Diameter tolerance ±0.03 mm (to be verified by GREENPOLYMER). Other colors available as OEM custom colors.
PVA and BVOH dissolve in water and are used for supports in cavities, overhangs and other places that cannot be cleared by hand.
Water-soluble supports absorb moisture very fast. After opening, keep them in a sealed bag or dry box, and feed from a dry box while printing.
Choose the breakaway support model by the main material: GRN3D-BRK-01 with PLA/PETG, GRN3D-BRK-02 with ABS/ASA, GRN3D-BRK-03 with PA/PET.
To save material, use the support material only for the support interface layers and print the support body in the main material.
Tell us about the part, material requirements, equipment and expected volume. We will recommend suitable grades and the validation data you need.