Engineering plastics overview

GREENPOLYMER offers ten families of compounded engineering plastics: ABS, PC/ABS, PC, PA6, PA66, PBT, mPPE, PP, ASA (including PC/ASA) and POM, 28 grades in total. The families include grades for flame retardancy, reinforcement, toughening, weather resistance, appearance and more. Browse by material or by part requirement.

ABS compounds

ABS engineering plastic for housings and structural parts.

Selection criteriaAppearanceToughnessFlow

3 grades

See this family

Grades by heat resistance and toughness

Example grade / typical values — to be corrected by GREENPOLYMER

Minimum heat deflection temperature≥ 40 °CMinimum tensile strength≥ 20 MPaMinimum notched impact strengthCharpy notched impact strength (kJ/m²) · ISO 179-1/1eA, 23 °C≥ 2 kJ/m²

28 / 28 grades match

Example grade / typical values — to be corrected by GREENPOLYMER

Grades by heat resistance and toughness

Grade	Name	Heat deflection temperature (°C)ISO 75-1/-2, 1.80 MPa	Charpy notched impact strength (kJ/m²)ISO 179-1/1eA, 23 °C	Tensile strength (MPa)ISO 527-1/-2	Flammability rating
GRN-PP-N510	Halogen-free flame-retardant PP	55–65	3–6	20–28	V-0
GRN-ABS-F510	Flame-retardant ABS	75–85	8–15	38–45	V-0
GRN-PCA-N520	Halogen-free flame-retardant PC/ABS (thin-wall, high-flow)	75–88	8–20	55–62	V-0
GRN-ABS-G110	General-purpose ABS	80–95	15–25	40–50	HB
GRN-ABS-H120	High-impact ABS	80–90	25–40	38–45	HB
GRN-ABS-A110	High-gloss ABS	80–90	12–22	42–50	HB
GRN-PCA-N510	Halogen-free flame-retardant PC/ABS	80–95	10–30	55–65	V-0
GRN-PCA-S520	Silicone-based flame-retardant PC/ABS	85–100	15–40	50–60	V-0
GRN-ASA-W110	Weather-resistant ASA	85–95	8–15	40–50	HB
GRN-PCAS-W510	Flame-retardant weather-resistant PC/ASA	85–100	15–35	48–58	V-1
GRN-PPE-N510	Halogen-free flame-retardant mPPE	90–120	8–15	50–65	V-0
GRN-POM-G110	General-purpose copolymer POM	90–105	5–8	60–68	HB
GRN-PCA-T310	Heat-resistant PC/ABS	95–115	35–55	50–60	HB
GRN-PCA-H320	Low-temperature high-impact PC/ABS	95–110	45–65	48–56	HB
GRN-PCA-W310	Weather-resistant PC/ABS	95–110	35–55	50–58	HB
GRN-PCAS-W310	Weather-resistant PC/ASA	95–110	30–50	50–60	HB
GRN-PCA-E510	Flame-retardant glass-fiber-reinforced PC/ABS	100–120	6–12	70–95	V-0
GRN-PC-N510	Halogen-free flame-retardant PC	115–128	20–50	60–68	V-0
GRN-PC-S520	Silicone-based flame-retardant PC	118–130	35–60	58–66	V-0
GRN-PP-E510	Flame-retardant glass-fiber-reinforced PP	120–145	5–9	50–70	V-0
GRN-PC-L110	Transparent PC	125–135	60–80	60–68	HB
GRN-PC-L120	IR-transmissive black PC	125–135	60–80	60–68	HB
GRN-PA6-E510	Flame-retardant glass-fiber-reinforced PA6 (GFRPA)	190–205	8–12	130–160	V-0
GRN-PA6-C510	Flame-retardant carbon-fiber-reinforced PA6 (CFRPA)	190–210	6–10	160–220	V-0
GRN-PA6-C310	Carbon-fiber-reinforced PA6 (CFRPA)	200–215	8–14	180–250	HB
GRN-PA6-E310	Glass-fiber-reinforced PA6 (GF30, non-flame-retardant)	200–215	10–15	160–190	HB
GRN-PBT-E510	Flame-retardant glass-fiber-reinforced PBT (high CTI)	200–215	6–10	100–130	V-0
GRN-PA66-E510	Halogen-free flame-retardant glass-fiber-reinforced PA66	230–250	8–12	140–170	V-0

Grade data

GRN-ABS-G110

General-purpose ABS

Tensile strengthISO 527-1/-2

40–50 MPa
Charpy notched impact strengthISO 179-1/1eA · 23 °C

15–25 kJ/m²
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

80–95 °C
DensityISO 1183

1.03–1.06 g/cm³
Add to sample tray Grade details
MoreLess

Typical values
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

HB
Processing
Drying
80–85 °C, 2–4 h; moisture content below 0.1 % recommended
Melt temperature
210–250 °C; flame-retardant grades at the lower end, usually not above 230 °C
Mold temperature
40–80 °C; upper end for high-gloss parts
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-ABS-H120

High-impact ABS

Tensile strengthISO 527-1/-2

38–45 MPa
Charpy notched impact strengthISO 179-1/1eA · 23 °C

25–40 kJ/m²
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

80–90 °C
DensityISO 1183

1.03–1.05 g/cm³
Add to sample tray Grade details
MoreLess

Typical values
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

HB
Processing
Drying
80–85 °C, 2–4 h; moisture content below 0.1 % recommended
Melt temperature
210–250 °C; flame-retardant grades at the lower end, usually not above 230 °C
Mold temperature
40–80 °C; upper end for high-gloss parts
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-ABS-A110

High-gloss ABS

Tensile strengthISO 527-1/-2

42–50 MPa
Charpy notched impact strengthISO 179-1/1eA · 23 °C

12–22 kJ/m²
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

80–90 °C
DensityISO 1183

1.04–1.06 g/cm³
Add to sample tray Grade details
MoreLess

Typical values
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

HB
Processing
Drying
80–85 °C, 2–4 h; moisture content below 0.1 % recommended
Melt temperature
210–250 °C; flame-retardant grades at the lower end, usually not above 230 °C
Mold temperature
40–80 °C; upper end for high-gloss parts
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-ABS-F510

Flame-retardant ABS

Tensile strengthISO 527-1/-2

38–45 MPa
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

V-0
Charpy notched impact strengthISO 179-1/1eA · 23 °C

8–15 kJ/m²
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

75–85 °C
Add to sample tray Grade details
MoreLess

Typical values
DensityISO 1183

1.16–1.20 g/cm³
Processing
Drying
80–85 °C, 2–4 h; moisture content below 0.1 % recommended
Melt temperature
210–250 °C; flame-retardant grades at the lower end, usually not above 230 °C
Mold temperature
40–80 °C; upper end for high-gloss parts
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-PCA-T310

Heat-resistant PC/ABS

Tensile strengthISO 527-1/-2

50–60 MPa
Charpy notched impact strengthISO 179-1/1eA · 23 °C

35–55 kJ/m²
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

95–115 °C
DensityISO 1183

1.12–1.16 g/cm³
Add to sample tray Grade details
MoreLess

Typical values
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

HB
Processing
Drying
100–110 °C, 3–4 h
Melt temperature
250–280 °C
Mold temperature
60–90 °C
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-PCA-H320

Low-temperature high-impact PC/ABS

Tensile strengthISO 527-1/-2

48–56 MPa
Charpy notched impact strengthISO 179-1/1eA · 23 °C; −30 °C: 25–40 kJ/m²

45–65 kJ/m²
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

95–110 °C
DensityISO 1183

1.12–1.15 g/cm³
Add to sample tray Grade details
MoreLess

Typical values
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

HB
Processing
Drying
100–110 °C, 3–4 h
Melt temperature
250–280 °C
Mold temperature
60–90 °C
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-PCA-W310

Weather-resistant PC/ABS

Tensile strengthISO 527-1/-2

50–58 MPa
Weathering (color difference)ISO 4892-2 · Xenon-arc 1000 h; design target

ΔE ≤ 3
Charpy notched impact strengthISO 179-1/1eA · 23 °C

35–55 kJ/m²
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

95–110 °C
Add to sample tray Grade details
MoreLess

Typical values
DensityISO 1183

1.12–1.16 g/cm³
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

HB
Processing
Drying
100–110 °C, 3–4 h
Melt temperature
250–280 °C
Mold temperature
60–90 °C
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-PCA-N510

Halogen-free flame-retardant PC/ABS

Tensile strengthISO 527-1/-2

55–65 MPa
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

V-0
Charpy notched impact strengthISO 179-1/1eA · 23 °C

10–30 kJ/m²
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

80–95 °C
Add to sample tray Grade details
MoreLess

Typical values
DensityISO 1183

1.17–1.20 g/cm³
Processing
Drying
100–110 °C, 3–4 h
Melt temperature
250–280 °C
Mold temperature
60–90 °C
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-PCA-N520

Halogen-free flame-retardant PC/ABS (thin-wall, high-flow)

Tensile strengthISO 527-1/-2

55–62 MPa
Flammability ratingUL 94 · 1.0 mm; design target, subject to test report

V-0
Charpy notched impact strengthISO 179-1/1eA · 23 °C

8–20 kJ/m²
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

75–88 °C
Add to sample tray Grade details
MoreLess

Typical values
DensityISO 1183

1.17–1.20 g/cm³
Processing
Drying
100–110 °C, 3–4 h
Melt temperature
250–280 °C
Mold temperature
60–90 °C
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-PCA-S520

Silicone-based flame-retardant PC/ABS

Tensile strengthISO 527-1/-2

50–60 MPa
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

V-0
Charpy notched impact strengthISO 179-1/1eA · 23 °C

15–40 kJ/m²
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

85–100 °C
Add to sample tray Grade details
MoreLess

Typical values
DensityISO 1183

1.15–1.20 g/cm³
Processing
Drying
100–110 °C, 3–4 h
Melt temperature
250–280 °C
Mold temperature
60–90 °C
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-PCA-E510

Flame-retardant glass-fiber-reinforced PC/ABS

Tensile strengthISO 527-1/-2

70–95 MPa
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

V-0
Flexural modulusISO 178

4–6.5 GPa
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

100–120 °C
Add to sample tray Grade details
MoreLess

Typical values
Charpy notched impact strengthISO 179-1/1eA · 23 °C

6–12 kJ/m²
DensityISO 1183

1.25–1.35 g/cm³
Processing
Drying
100–110 °C, 3–4 h
Melt temperature
250–280 °C
Mold temperature
60–90 °C
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-PC-N510

Halogen-free flame-retardant PC

Tensile strengthISO 527-1/-2

60–68 MPa
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

V-0
Charpy notched impact strengthISO 179-1/1eA · 23 °C

20–50 kJ/m²
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

115–128 °C
Add to sample tray Grade details
MoreLess

Typical values
DensityISO 1183

1.20–1.24 g/cm³
Processing
Drying
120 °C, 3–4 h; moisture content ≤ 0.02 % recommended
Melt temperature
280–310 °C; for flame-retardant grades keep within the TDS upper limit
Mold temperature
80–110 °C
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-PC-S520

Silicone-based flame-retardant PC

Tensile strengthISO 527-1/-2

58–66 MPa
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

V-0
Charpy notched impact strengthISO 179-1/1eA · 23 °C

35–60 kJ/m²
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

118–130 °C
Add to sample tray Grade details
MoreLess

Typical values
DensityISO 1183

1.19–1.22 g/cm³
Processing
Drying
120 °C, 3–4 h; moisture content ≤ 0.02 % recommended
Melt temperature
280–310 °C; for flame-retardant grades keep within the TDS upper limit
Mold temperature
80–110 °C
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-PA6-E510

Flame-retardant glass-fiber-reinforced PA6 (GFRPA)

Tensile strengthISO 527-1/-2 · dry

130–160 MPa
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

V-0
Flexural modulusISO 178

8–10 GPa
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

190–205 °C
Add to sample tray Grade details
MoreLess

Typical values
Charpy notched impact strengthISO 179-1/1eA · 23 °C; dry

8–12 kJ/m²
DensityISO 1183

1.40–1.50 g/cm³
Processing
Drying
80 °C, 4–6 h (desiccant dryer); moisture content 0.05–0.2 % recommended
Melt temperature
260–290 °C
Mold temperature
80–100 °C; upper end for a better surface
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-PA6-C510

Flame-retardant carbon-fiber-reinforced PA6 (CFRPA)

Tensile strengthISO 527-1/-2 · dry

160–220 MPa
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

V-0
Flexural modulusISO 178

12–18 GPa
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

190–210 °C
Add to sample tray Grade details
MoreLess

Typical values
Charpy notched impact strengthISO 179-1/1eA · 23 °C; dry

6–10 kJ/m²
DensityISO 1183

1.25–1.35 g/cm³
Processing
Drying
80 °C, 4–6 h (desiccant dryer); moisture content 0.05–0.2 % recommended
Melt temperature
260–290 °C
Mold temperature
80–100 °C; upper end for a better surface
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-PA6-C310

Carbon-fiber-reinforced PA6 (CFRPA)

Tensile strengthISO 527-1/-2 · dry

180–250 MPa
Flexural modulusISO 178

13–20 GPa
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

200–215 °C
Charpy notched impact strengthISO 179-1/1eA · 23 °C; dry

8–14 kJ/m²
Add to sample tray Grade details
MoreLess

Typical values
DensityISO 1183

1.20–1.28 g/cm³
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

HB
Processing
Drying
80 °C, 4–6 h (desiccant dryer); moisture content 0.05–0.2 % recommended
Melt temperature
260–290 °C
Mold temperature
80–100 °C; upper end for a better surface
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-PA6-E310

Glass-fiber-reinforced PA6 (GF30, non-flame-retardant)

Tensile strengthISO 527-1/-2 · dry

160–190 MPa
Flexural modulusISO 178 · dry

8.5–10 GPa
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

200–215 °C
Charpy notched impact strengthISO 179-1/1eA · 23 °C; dry

10–15 kJ/m²
Add to sample tray Grade details
MoreLess

Typical values
DensityISO 1183

1.34–1.38 g/cm³
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

HB
Processing
Drying
80 °C, 4–6 h (desiccant dryer); moisture content 0.05–0.2 % recommended
Melt temperature
260–290 °C
Mold temperature
80–100 °C; upper end for a better surface
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-PA66-E510

Halogen-free flame-retardant glass-fiber-reinforced PA66

Tensile strengthISO 527-1/-2 · dry

140–170 MPa
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

V-0
Flexural modulusISO 178

8–10 GPa
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

230–250 °C
Add to sample tray Grade details
MoreLess

Typical values
Charpy notched impact strengthISO 179-1/1eA · 23 °C; dry

8–12 kJ/m²
DensityISO 1183

1.45–1.55 g/cm³
Processing
Drying
80 °C, 4–6 h (desiccant dryer); moisture content 0.05–0.2 % recommended
Melt temperature
280–300 °C; do not exceed the TDS upper limit for flame-retardant grades
Mold temperature
80–110 °C
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-PBT-E510

Flame-retardant glass-fiber-reinforced PBT (high CTI)

Tensile strengthISO 527-1/-2

100–130 MPa
Comparative tracking index (CTI)IEC 60112 · design target

≥ 600 V
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

V-0
Flexural modulusISO 178

8–10 GPa
Add to sample tray Grade details
MoreLess

Typical values
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

200–215 °C
Charpy notched impact strengthISO 179-1/1eA · 23 °C

6–10 kJ/m²
DensityISO 1183

1.55–1.70 g/cm³
Processing
Drying
120 °C, 3–4 h (desiccant dryer); moisture content ≤ 0.02 %
Melt temperature
240–270 °C
Mold temperature
60–90 °C; upper end when surface and dimensional stability matter
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-PPE-N510

Halogen-free flame-retardant mPPE

Tensile strengthISO 527-1/-2

50–65 MPa
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

V-0
Charpy notched impact strengthISO 179-1/1eA · 23 °C

8–15 kJ/m²
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

90–120 °C
Add to sample tray Grade details
MoreLess

Typical values
DensityISO 1183

1.06–1.12 g/cm³
Processing
Drying
100–110 °C, 2–4 h
Melt temperature
260–300 °C
Mold temperature
70–100 °C
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-PP-N510

Halogen-free flame-retardant PP

Tensile strengthISO 527-1/-2

20–28 MPa
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

V-0
Charpy notched impact strengthISO 179-1/1eA · 23 °C

3–6 kJ/m²
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

55–65 °C
Add to sample tray Grade details
MoreLess

Typical values
DensityISO 1183

1.00–1.10 g/cm³
Processing
Drying
Usually not needed; if damp, 80 °C, 1–2 h
Melt temperature
190–220 °C (not too high for flame-retardant grades)
Mold temperature
30–60 °C
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-PP-E510

Flame-retardant glass-fiber-reinforced PP

Tensile strengthISO 527-1/-2

50–70 MPa
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

V-0
Flexural modulusISO 178

4–6 GPa
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

120–145 °C
Add to sample tray Grade details
MoreLess

Typical values
Charpy notched impact strengthISO 179-1/1eA · 23 °C

5–9 kJ/m²
DensityISO 1183

1.15–1.30 g/cm³
Processing
Drying
Usually not needed; if damp, 80 °C, 1–2 h
Melt temperature
190–220 °C (not too high for flame-retardant grades)
Mold temperature
30–60 °C
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-ASA-W110

Weather-resistant ASA

Tensile strengthISO 527-1/-2

40–50 MPa
Weathering (color difference)ISO 4892-2 · Xenon-arc 1000 h; design target

ΔE ≤ 3
Charpy notched impact strengthISO 179-1/1eA · 23 °C

8–15 kJ/m²
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

85–95 °C
Add to sample tray Grade details
MoreLess

Typical values
DensityISO 1183

1.06–1.08 g/cm³
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

HB
Processing
Drying
80–85 °C, 2–4 h
Melt temperature
230–260 °C
Mold temperature
50–80 °C
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-PCAS-W310

Weather-resistant PC/ASA

Tensile strengthISO 527-1/-2

50–60 MPa
Weathering (color difference)ISO 4892-2 · Xenon-arc 1000 h; design target

ΔE ≤ 3
Charpy notched impact strengthISO 179-1/1eA · 23 °C

30–50 kJ/m²
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

95–110 °C
Add to sample tray Grade details
MoreLess

Typical values
DensityISO 1183

1.14–1.17 g/cm³
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

HB
Processing
Drying
80–85 °C, 2–4 h
Melt temperature
230–260 °C
Mold temperature
50–80 °C
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-PCAS-W510

Flame-retardant weather-resistant PC/ASA

Tensile strengthISO 527-1/-2

48–58 MPa
Weathering (color difference)ISO 4892-2 · Xenon-arc 1000 h; design target

ΔE ≤ 3
Flammability ratingGB/T 5169.16 / UL 94 · 1.5 mm; design target, subject to test report

V-1
Charpy notched impact strengthISO 179-1/1eA · 23 °C

15–35 kJ/m²
Add to sample tray Grade details
MoreLess

Typical values
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

85–100 °C
DensityISO 1183

1.18–1.25 g/cm³
Processing
Drying
80–85 °C, 2–4 h
Melt temperature
230–260 °C
Mold temperature
50–80 °C
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-PC-L110

Transparent PC

Tensile strengthISO 527-1/-2

60–68 MPa
Light transmittanceISO 13468-1 · 3 mm; design target

≥ 88 %
Charpy notched impact strengthISO 179-1/1eA · 23 °C

60–80 kJ/m²
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

125–135 °C
Add to sample tray Grade details
MoreLess

Typical values
DensityISO 1183

1.19–1.21 g/cm³
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

HB
Processing
Drying
120 °C, 3–4 h; moisture content ≤ 0.02 % recommended
Melt temperature
280–310 °C; for flame-retardant grades keep within the TDS upper limit
Mold temperature
80–110 °C
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-PC-L120

IR-transmissive black PC

Tensile strengthISO 527-1/-2

60–68 MPa
Charpy notched impact strengthISO 179-1/1eA · 23 °C

60–80 kJ/m²
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

125–135 °C
DensityISO 1183

1.19–1.21 g/cm³
Add to sample tray Grade details
MoreLess

Typical values
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

HB
Processing
Drying
120 °C, 3–4 h; moisture content ≤ 0.02 % recommended
Melt temperature
280–310 °C; for flame-retardant grades keep within the TDS upper limit
Mold temperature
80–110 °C
Example grade / typical values — to be corrected by GREENPOLYMER
GRN-POM-G110

General-purpose copolymer POM

Tensile strengthISO 527-1/-2

60–68 MPa
Flexural modulusISO 178

2.4–2.9 GPa
Heat deflection temperatureISO 75-1/-2 · 1.80 MPa

90–105 °C
Charpy notched impact strengthISO 179-1/1eA · 23 °C

5–8 kJ/m²
Add to sample tray Grade details
MoreLess

Typical values
DensityISO 1183

1.39–1.42 g/cm³
Flammability ratingUL 94 · 1.5 mm; design target, subject to test report

HB
Processing
Drying
Usually not needed; if damp, 80 °C, 2–3 h
Melt temperature
190–210 °C; do not exceed 230 °C
Mold temperature
60–90 °C; upper end for precision parts, for more stable dimensions
Example grade / typical values — to be corrected by GREENPOLYMER

Find by material

Family	Suitable parts	Grades	Link
ABS	Appearance parts without high heat requirements, accessory housings, toolboxes	4	ABS
PC/ABS	Charger and appliance housings, energy storage housings, tool housings, outdoor appearance parts	7	PC/ABS
PC	Flame-retardant housings with higher heat and impact requirements; transparent lamp covers and windows	3	PC
PA6 (reinforced)	Structural parts, brackets, articulated arms, airframes	3	PA6
PA66 (halogen-free flame-retardant, reinforced)	Connectors, terminal blocks, electrical brackets	1	PA66
PBT (flame-retardant, reinforced)	Connectors, coil bobbins, insulating parts with a high comparative tracking index (CTI)	1	PBT
mPPE (commonly called PPO)	Electrical parts in damp heat, battery module brackets, junction boxes	1	mPPE
PP (flame-retardant)	Internal parts of home appliances, cable ducts, flame-retardant structural parts	2	PP
ASA, PC/ASA	Outdoor housings, vehicle exterior parts, outdoor security housings	2	ASA and PC/ASA
POM (copolymer)	Gears, snap fits, sliders, bushings	1	POM

Find by requirement

Function code quick reference

Your requirement	Function code to look at	Example grades
Flame retardancy, halogen-free	N (see also the halogen-free flame-retardant reinforced GRN-PA66-E510)	GRN-PCA-N510, GRN-PCA-N520, GRN-PC-N510, GRN-PPE-N510, GRN-PP-N510
Flame retardancy without fluorinated anti-drip agents	S	GRN-PCA-S520, GRN-PC-S520
Flame retardancy at low cost	F	GRN-ABS-F510
Flame retardancy plus stiffness and dimensional stability	E (glass fiber / mineral reinforced)	GRN-PCA-E510, GRN-PA6-E510, GRN-PA66-E510, GRN-PBT-E510, GRN-PP-E510
Reinforced, no flame retardancy required	E / C (hundreds digit 3)	GRN-PA6-E310, GRN-PA6-C310
Lightweight structural parts	C (carbon-fiber-reinforced)	GRN-PA6-C310, GRN-PA6-C510
No embrittlement at low temperature, drop resistant	H	GRN-ABS-H120, GRN-PCA-H320
Outdoor use	W	GRN-PCA-W310, GRN-ASA-W110, GRN-PCAS-W310; GRN-PCAS-W510 when flame retardancy is needed
High gloss, mold-in-color (paint-free)	A	GRN-ABS-A110
Heat resistance	T	GRN-PCA-T310
Transparent	L	GRN-PC-L110
IR-transmissive, black in appearance (sensor and LiDAR windows)	—	IR-transmissive black PC is available for sensor and LiDAR windows; grade provided per project
Food contact	—	Food-contact grades are available, with compliance testing supported to GB 4806 and (EU) No 10/2011 requirements; food-contact grades are provided per project
General purpose	G	GRN-ABS-G110, GRN-POM-G110
Contains recycled content	Suffix -R	An -R version of each grade can be customized

For more scenarios, see the selection guide.

How to read a grade code

GRN-PCA-N510-R

Brand GRN: GREENPOLYMER compound
Base resin PCA: PC/ABS
Focus N: Halogen-free flame retardant
Tier 5: Flame-retardant tier
Sequence 10: Development sequence 10
Recycled R: Contains recycled content

GRN: GREENPOLYMER pellet prefix
PCA: Base resinPCA = PC/ABS (others: ABS, PC, PA6, PA66, PBT, PPE, PP, ASA, PCAS, POM)
N: Function codeN = halogen-free flame retardancy
510: Three-digit serialHundreds digit 1 = standard tier, 3 = high-performance tier, 5 = flame-retardant tier
-R: Contains recycled content (ratio set per project, stated in the TDS and traceability documents)

How the material families compare

Typical ranges of the base resins, for an initial choice of direction. Typical values. Refer to the actual TDS. For grade data, see Products.

Unreinforced materials

Item	ABS	PC/ABS	PC	mPPE	PP (flame-retardant)	ASA	PC/ASA	POM
Density (g/cm³)	1.03–1.06	1.10–1.20	1.19–1.24	1.06–1.12	1.00–1.10	1.06–1.08	1.14–1.17	1.39–1.42
HDT (ISO 75, 1.80 MPa)	80–95 °C	95–120 °C	115–135 °C	90–120 °C	55–65 °C	85–95 °C	95–110 °C	90–105 °C
Impact toughness (23 °C)	Medium	High	High	Medium	Low	Medium	High	Low–medium
Difficulty of halogen-free V-0	High	Medium	Relatively low	Relatively low	Medium	Not common	Not common	Very hard
Moisture absorption	Low	Low	Low	Very low	Very low	Low	Low	Very low
Weather resistance	Poor	Moderate	Moderate	Moderate	Moderate	Good	Good	Moderate
Chemical resistance	Moderate	Moderate	Relatively sensitive	Sensitive to some solvents	Good	Moderate	Moderate	Good (not resistant to strong acids)
Appearance / color matching	Good	Good	Good	Moderate	Moderate	Good	Good	Moderate
Relative cost	Low	Medium	Medium–high	Medium–high	Low	Medium	Medium	Medium

Reinforced materials (dry)

Item	PA6 reinforced	PA66 halogen-free flame-retardant reinforced	PBT flame-retardant reinforced	PP flame-retardant reinforced	PC/ABS flame-retardant reinforced
Density (g/cm³)	1.20–1.50	1.45–1.55	1.55–1.70	1.15–1.30	1.25–1.35
HDT (ISO 75, 1.80 MPa)	190–215 °C	230–250 °C	200–215 °C	120–145 °C	100–120 °C
Flexural modulus	8–20 GPa	8–10 GPa	8–10 GPa	4–6 GPa	4–6.5 GPa
Moisture absorption	High (affects strength)	Relatively high	Low	Very low	Low
Electrical characteristics	Carbon fiber can make it conductive	Insulating	Insulating, high CTI	Insulating	Insulating
Relative cost	Medium–high	Medium–high	Medium	Low	Medium

Pellets and 3D printing filament

Materials with the same name (such as ABS and PC/ABS) exist both as pellets for injection molding and as 3D printing filament. Their formulations, test specimens and property data differ and are not interchangeable. For filament, see the filament pages.

Base resins not listed

Other base resins, such as PPS, PPA and PC/PBT, have no standard grades at present. Status: Available as a project-based development. If your project needs one, contact us.

Documents and contact

TDS / SDS (Chinese, English): email hello@greenpolymer.com stating the grade and language.
Phone: +86 18822892298

Products

Material categories are confirmed; listed grades are examples (to be verified by GREENPOLYMER).

Contact us

Tell us about the part, material requirements, equipment and expected volume. We will recommend suitable grades and the validation data you need.

Request a quote Request a sample

Engineering plastics overview

Grades by heat resistance and toughness

Find by material

Find by requirement

How to read a grade code

How the material families compare

Pellets and 3D printing filament

Base resins not listed

Documents and contact

Products

ABS compounds

PC/ABS compounds

Flame-retardant compounds

Recycled compounds

PC compounds

PA6 / PA66 compounds

PBT compounds

mPPE compounds

PP compounds

ASA and PC/ASA compounds

POM compounds

Contact us