Photopolymer resins are listed separately from the five filament groups.
Typical values. Refer to the actual TDS.
| Compare | Model | Light source | Recommended layer height | Post-processing | Tensile strengthASTM D638 · After post-cure | Shore hardnessASTM D2240 | Viscosity25 °C | Elongation at breakASTM D638 | Net weight | Standard colors | Uses |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard Photopolymer ResinGRN3D-RSN-S01 | 405 nm (some 385 nm) | 0.025–0.1 mm | Wash in alcohol, then post-cure | 30–55 MPa | 75–85 D | 150–400 mPa·s | — | 0.5 kg / 1 kg bottles | 1003 Grey, 1001 White, 1101 Black, 9001 Clear | — | |
| Toughened Photopolymer ResinGRN3D-RSN-T01 | 405 nm (some 385 nm) | 0.05–0.1 mm | Wash in alcohol, then post-cure | 25–40 MPa | 65–80 D | — | 15–40 % | 0.5 kg / 1 kg bottles | 1003 Grey, 1101 Black | — |
GRN3D-RSN-S01
Fine detail
GRN3D-RSN-T01
Impact resistant, suitable for snap fits
Typical values. Refer to the actual TDS. Parameters: to be corrected by GREENPOLYMER. GREENPOLYMER test data: to be verified by GREENPOLYMER.
Tell us about the part, material requirements, equipment and expected volume. We will recommend suitable grades and the validation data you need.