Flame-retardant compounds
FR6016
- Prefix FR
- Flame retardant
- Series 6
- PC/ABS
- Filler 0
- Unfilled
- MVR 16
- 16 · 240 °C / 5 kg
Halogen-free flame-retardant PC/ABS (MVR 16)
- Planned grade
- Available
- GREENPOLYMER TDS
- V-0UL 94
- 16 cm³/10 minMelt volume-flow rate (MVR) · 240 °C / 5 kg
- ≈ 98 °CHDT · 1.80 MPa
Datasheet
Each value is shown with its test standard and conditions.
- DensityISO 11831.17–1.20g/cm³
- Melt volume-flow rate (MVR)ISO 1133 · 240 °C / 5 kg16cm³/10 min
- Tensile stress at yieldISO 527-1/-255–62MPa
- Tensile modulusISO 527-1/-22.5–2.9GPa
- Izod notched impact strengthISO 180/1A · 23 °C25–40kJ/m²
- Heat deflection temperatureISO 75-1/-2 · 1.80 MPa≈ 98°C
- Heat deflection temperatureISO 75-1/-2 · 0.45 MPa100–104°C
- Vicat softening temperatureISO 306 · B120105–112°C
- Comparative tracking indexIEC 60112 · solution A350V
Typical values; not for use as specifications.
Processing window
- Drying80 °C, 4 h, desiccant dryer
- Mold temperature60–90 °C
- Melt temperature240–270 °C
- ≤ 0.02 %Max. moisture before processing
- 0.5–0.7 %Molding shrinkage
Colors
Colors
Natural and black; other colors matched to customer standards
Description
Flame-retardant PC/ABS alloy combining flame retardancy, toughness and moldability, for chargers, power supplies and electrical housings. Halogen-free flame-retardant system. Flow: MVR 16 cm³/10 min (240 °C / 5 kg).
Key points
Used for
Other grades in this family
- FR6015Halogen-free flame-retardant PC/ABS (MVR 15)
- FR6015UHalogen-free flame-retardant PC/ABS (UV-stabilized)
- FR6015FHalogen-free flame-retardant PC/ABS (improved flow)
- FR6019Halogen-free flame-retardant PC/ABS (MVR 19)
- FR6023THalogen-free flame-retardant PC/ABS (thin-wall FR)
- FR6025Halogen-free flame-retardant PC/ABS (MVR 25)
- FR6031Halogen-free flame-retardant PC/ABS (MVR 31)
- FR611010 % glass-fiber-reinforced halogen-free flame-retardant PC/ABS
- FR621515 % mineral-filled halogen-free flame-retardant PC/ABS
- FR30035Flame-retardant ABS
- FR6022SSilicone-based flame-retardant PC/ABS
Contact us
Tell us about the part, material requirements, equipment and expected volume. We will recommend suitable grades and the validation data you need.