Browse by material
Biodegradable materials
Biodegradation performance is subject to third-party testing and certification.
Related grades
Typical values; not for use as specifications
GB02004BFD
Biodegradable PBAT/PLA blown-film compoundPBAT 60–85 %, PLA 10–30 %, mineral 0–20 %. Gives an even film surface and bags that open easily; runs on conventional PE blown-film lines with adjusted settings.Carrier, waste and produce bags, Mailer bagsGL01004BFD
Biodegradable PBAT mulch-film compoundPBAT-based, may contain minor PLA / PPC, UV stabilizer and slip additives. For thin-gauge film; its service life in the field is set by the formulation.Agricultural mulch filmGB03004BFD
Biodegradable starch-based blown-film compoundThermoplastic starch 15–35 % with PBAT / PLA and other biodegradable polyesters. A higher bio-based content and a soft hand feel.Waste and food-waste bags, Carrier bagsGL00020D
Biodegradable PLA injection-molding compound (general purpose)PLA ≥ 85 %, nucleating and processing aids. Stiff, with a good surface finish; for use at room temperature.Household goods, Stationery, Tableware for cold food and drinksGL00017HTD
Biodegradable heat-resistant PLA injection-molding compoundPLA with nucleating agent and mineral, crystallized in the mold or by post-annealing. Crystallization raises its heat resistance, for hot-drink and hot-food parts (validated per project).Heat-resistant cutlery, lids, Coffee capsulesGL00012HID
Biodegradable toughened PLA injection-molding compoundPLA with PBAT / PBS toughening phase and compatibilizer. Tougher than general-purpose PLA and less prone to brittle fracture.Household goods, snap-fit parts, Consumer-electronics accessories and packaging inserts (evaluated per project)GL00006SHD
Biodegradable PLA sheet-extrusion compoundPLA ≥ 90 %, processing aids. High clarity and a wide thermoforming window.Cold-drink cups, Trays, Blister packagingGL04015D
Biodegradable PBS injection-molding compoundPBS / PBSA-based, may contain PLA and mineral. More heat resistant than PBAT, with good toughness.Tableware, household goods, Straws (extrusion, per project)GL05012D
Biodegradable PHA injection-molding compoundPHA (PHBV / P34HB etc.) ≥ 60 %, may be blended with PLA, nucleating agent. High bio-based content.Tableware, cosmetic packaging, Household goodsGL00005FOD
Biodegradable PLA foaming compoundHigh-melt-strength PLA (chain-extended) with nucleating agent. Its expansion ratio can be adjusted; for cushioning and insulation.Protective packaging for appliances and electronics, Cold-chain boxesGL00010FBD
Biodegradable PLA filament and fiber compoundPLA ≥ 90 %, diameter-stability and lubricating aids. Extrudes consistently; for 3D-printing filament and nonwovens.3D-printing filament, Nonwovens, monofilamentGL06007D
Biodegradable PCL low-temperature forming compoundPCL ≥ 90 %. A low melting point (about 60 °C); used to modify other biodegradable compounds.Hand-formable parts, 3D-pen consumables, Masterbatch carrier, hot-melt modification
Contact us
Tell us about the part, material requirements, equipment and expected volume. We will recommend suitable grades and the validation data you need.