PP compounds
GF90220
- Prefix GF
- Reinforced / filled (non-flame-retardant)
- Series 90
- PP
- Filler 2
- Mineral (talc etc.)
- Filler content 20
- 20 %
Talc-filled PP (20 %)
- Planned grade
- Available
- GREENPOLYMER TDS
- HBUL 94
- 8–20 g/10 minMelt mass-flow rate (MFR) · 230 °C / 2.16 kg
- 60–75 °CHDT · 1.80 MPa
Datasheet
Each value is shown with its test standard and conditions.
- DensityISO 11831.04–1.15g/cm³
- Melt mass-flow rate (MFR)ISO 1133 · 230 °C / 2.16 kg8–20g/10 min
- Tensile strengthISO 527-1/-222–30MPa
- Flexural modulusISO 1782.0–3.0GPa
- Charpy notched impact strengthISO 179-1/1eA · 23 °C3–7kJ/m²
- Heat deflection temperatureISO 75-1/-2 · 1.80 MPa60–75°C
Typical values; not for use as specifications.
Colors
Colors
Natural and black; other colors matched to customer standards
Description
Stiffer and more dimensionally stable than unfilled PP, at low cost.
Key points
Used for
Contact us
Tell us about the part, material requirements, equipment and expected volume. We will recommend suitable grades and the validation data you need.