Bio-based materials
GL91011B80
- Prefix GL
- General purpose (single resin, unfilled, non-flame-retardant)
- Series 91
- PE
- Filler 0
- Unfilled
- MFR 11
- 11 · 190 °C / 2.16 kg
- Bio-based content B80
- Bio-based carbon ≥ 80 %
Bio-based PE injection-molding compound
- Planned grade
- Available
- GREENPOLYMER TDS
- ≥ 80 %Bio-based carbon content
- 2–20 g/10 minMelt mass-flow rate (MFR) · 190 °C / 2.16 kg
- 60–80 °CHDT · 0.45 MPa
Datasheet
Each value is shown with its test standard and conditions.
- DensityISO 11830.92–0.96g/cm³
- Melt mass-flow rate (MFR)ISO 1133 · 190 °C / 2.16 kg2–20g/10 min
- Tensile strengthISO 527-1/-218–30MPa
- Flexural modulusISO 1780.4–1.2GPa
- Heat deflection temperatureISO 75-1/-2 · 0.45 MPa60–80°C
Typical values; not for use as specifications.
Content and colors
Bio-based carbon content
≥ 80 %
Share of total organic carbon (ASTM D6866)
Composition
Sugarcane-ethanol bio-based PE (HDPE / LDPE), processing aids
Colors
Natural and black; other colors matched to customer standards
Description
Sugarcane-ethanol bio-based PE (HDPE / LDPE), processing aids. Processes like fossil-based PE and goes into the same recycling stream as PE.
Key points
Used for
Other grades in this family
- GF42130B35Bio-based glass-fiber-reinforced PA56 (GF30)
- FR42130NB30Bio-based halogen-free flame-retardant glass-fiber-reinforced PA56
- GF43130B50Bio-based glass-fiber-reinforced PA610 (GF30)
- GL44005EXB90Bio-based PA1010 extrusion compound
- GB07025B20Bio-based PC/PLA alloy
- FR07025NB20Bio-based halogen-free flame-retardant PC/PLA alloy
- GF90420B20Plant-fiber-filled PP
Contact us
Tell us about the part, material requirements, equipment and expected volume. We will recommend suitable grades and the validation data you need.