Biodegradable materials
GL04015D
- Prefix GL
- General purpose (single resin, unfilled, non-flame-retardant)
- Series 04
- PBS
- Filler 0
- Unfilled
- MFR 15
- 15 · 190 °C / 2.16 kg
- Biodegradable D
- Designed to be fully biodegradable
Biodegradable PBS injection-molding compound
- Planned grade
- Available
- GREENPOLYMER TDS
- 85–97 °CHDT · 0.45 MPa
- 5–25 g/10 minMelt mass-flow rate (MFR) · 190 °C / 2.16 kg
Datasheet
Each value is shown with its test standard and conditions.
- DensityISO 11831.24–1.30g/cm³
- Melt mass-flow rate (MFR)ISO 1133 · 190 °C / 2.16 kg5–25g/10 min
- Tensile strengthISO 527-1/-230–40MPa
- Flexural modulusISO 1780.5–0.9GPa
- Charpy notched impact strengthISO 179-1/1eA · 23 °C4–10kJ/m²
- Heat deflection temperatureISO 75-1/-2 · 0.45 MPa85–97°C
- Melting temperatureISO 11357-3110–116°C
Typical values; not for use as specifications.
Colors
Biodegradation performance is subject to third-party testing and certification
Composition
PBS / PBSA-based, may contain PLA and mineral
Colors
Natural; colors assessed per project (masterbatch must meet the same degradation and heavy-metal requirements)
Description
PBS / PBSA-based, may contain PLA and mineral. More heat resistant than PBAT, with good toughness.
Key points
Used for
Other grades in this family
- GB02004BFDBiodegradable PBAT/PLA blown-film compound
- GL01004BFDBiodegradable PBAT mulch-film compound
- GB03004BFDBiodegradable starch-based blown-film compound
- GL00020DBiodegradable PLA injection-molding compound (general purpose)
- GL00017HTDBiodegradable heat-resistant PLA injection-molding compound
- GL00012HIDBiodegradable toughened PLA injection-molding compound
- GL00006SHDBiodegradable PLA sheet-extrusion compound
- GL05012DBiodegradable PHA injection-molding compound
- GL00005FODBiodegradable PLA foaming compound
- GL00010FBDBiodegradable PLA filament and fiber compound
- GL06007DBiodegradable PCL low-temperature forming compound
Contact us
Tell us about the part, material requirements, equipment and expected volume. We will recommend suitable grades and the validation data you need.