PBT / PET (flame-retardant and reinforced)
GF81130
- Prefix GF
- Reinforced / filled (non-flame-retardant)
- Series 81
- PET
- Filler 1
- Glass fiber
- Filler content 30
- 30 %
Glass-fiber-reinforced PET (GF30)
- Planned grade
- Available
- GREENPOLYMER TDS
- HB @ 0.9 mmUL 94
- 30 %Glass-fiber content
- ≈ 224 °CHDT · 1.80 MPa
Datasheet
Each value is shown with its test standard and conditions.
- Glass-fiber content—30%
- DensityISO 11831.55–1.58g/cm³
- Tensile stress at breakISO 527-1/-2160–175MPa
- Tensile modulusISO 527-1/-210.5–11.5GPa
- Melting temperatureISO 11357-3≈ 252°C
- Heat deflection temperatureISO 75-1/-2 · 1.80 MPa≈ 224°C
- Heat deflection temperatureISO 75-1/-2 · 0.45 MPa245–250°C
- Comparative tracking indexIEC 60112250V
Typical values; not for use as specifications.
Processing window
- Drying120 °C, 4–6 h, desiccant dryer
- Mold temperature120–140 °C
- Melt temperature280–300 °C
- ≤ 0.02 %Max. moisture before processing
- 0.1 % (flow) / 0.6 % (transverse)Molding shrinkage
Colors
Colors
Natural and black; other colors matched to customer standards
Description
High stiffness and heat resistance, good surface finish.
Key points
Used for
Contact us
Tell us about the part, material requirements, equipment and expected volume. We will recommend suitable grades and the validation data you need.